All Rounder

35 years of shaping has developed this outline which Bob uses in all short boards from 5ft 3in to 7ft 6in. The bottoms have a 4mm concave fading out through the tail. Rails are medium low, soft with hard edges around the tail. Tail shapes can be Rounded Square with a hip, Rounded Pin or Swallow Tails. These boards are glassed to last. With 6oz bottoms and 4 times 4oz decks. Fin setups are FCS Thruster, Quad or 5. These boards can also be made with EPS and Epoxy.@ an extra cost.

 

 

Suggested Sizes 
 

6' x 18 1/4 x 2 1/8 or 6' x 18 3/4 x 2 1/4

6'1" x 18 1/2 x 2 1/4 or 6'1" x 18 3/4 x 2 5/16

6'2" x 18 3/4 x 2 3/8 or 6'2" x 18 7/8 x 2 7/16

6'3" x 18 3/4 x 2 3/8 or 6'3" x 18 7/8 x 2 7/16

6'4" x 18 7/8 x 2 3/8 or 6'4" x 19 x 2 7/16

6'5" x 19 x 2 1/2 or 6'5" 19 1/2 x 2 5/8

6'6" x 19 1/8 x 2 1/2 or 6'6" 19 1/2 x 2 3/4

6'8" x 19 1/2 x 2 5/8 or 2/4

6'10" x 19 3/4 x 2 3/4

7' x 19 7/8 x 2 3/4

With Epoxy